Temperature setting function button
:
Press
“
”
button once, the set indicator will light up. Press
“
”
or
“
“
button to adjust the
temperature and press
“
”
button again to confirm the set temperature. Adjustable temperature
range is 20-39.5
℃
. (Press
“
”
button and hold for 3 seconds to test egg turning function)
Indicator status description:
The red light on left side of the display screen is used as heating indicator. When it is on that means
the machine is heating.
Operation Tips:
1. Plug into AC220V/AC110V, the left light on and incubator enters into working mode (heater also
start working);
2. Ensure adding full water into water tank before use;
3. Before incubating, preheat the machine for 15 - 30 minutes, and check whether the setting
temperature is 38
°
C. If not, please set the temperature to 38
°
C. Please refer to the button
description to set;
4. Check whether the two LED indicators are on during warm-up;
5. Put fertilized eggs into the machine, close the cover, then plug in.
Summary of Contents for Smile Series
Page 1: ......
