5. Maintenance
Regular Maintenance
Depending on the weekly working hours, you should check the water level inside the water tank. If the level is
too low, refill the tank with electrolyte solution to allow amperage to be at normal operational values.
Winter Maintenance
If temperatures drop below -4ºC then you should add 20-25% isopropyl alcohol to the water solution in order
to avoid water from freezing, even with the more severe temperatures. Don´t use another type of alcohol or
you risk damaging the stainless steel plates.
Bi-annual Maintenance
Depending on the working hours of the machine, you should clean the machine and remove all deposits every
six months. Please follow these simple steps:
1. Add 50% isopropyl alcohol to the water solution and leave it in the machine without working for 24 hours;
2. Next day start the machine and let it work for 20 minutes;
3. Stop the machine and open the frontal panel. Inside the machine you will find 2 valves to help you flush the
water;
4. Once all water is out, please close the valves a add fresh water until you reach the maximum water level in
the tank;
5. Open the 2 valves again and let it flush all the liquid inside the machine;
6. Close the valves and put in place the frontal panel;
7. Repeat all steps mentioned in point 3.1.
