Operating Instruction Manual:
OM-TLA50-01
From Serial Number:
All
1
OPERATING INSTRUCTION MANUAL
TLA50 SERIES | TOUGHLIFT JACKING SYSTEM
- AIR DRIVEN
Hi-Force TLA50 series Air Driven ToughLift Jacking Systems are designed to be an easy to operate,
all-in-one air-powered jacking system. The mobile unit is easy to manoeuvre and the combination of an
adjustable handle and
the ‘V-Lift’ system facilitates easy, accurate positioning of the lifting cylinder under
the load. Available with a 254mm or 355mm stroke length, the units have a lifting capacity of 50 tonnes at
a maximum operating pressure of 700 bar (10,000 psi). This manual applies to the Hi-Force TLA50 series
Air Driven ToughLift Jacking Systems Only. It contains the latest product information available at the time
of publication and approval. For information relating to the servicing of an Air Driven ToughLift, see the
servicing instructions, which are available on the Hi-Force website. Hi-Force reserves the right to make
changes to this document at any time without notice.
This
‘Original instructions’ document assumes that the operator carrying out any operation with this
product is trained and competent to do so. This manual does not attempt to cover all details or variations
in the equipment. Nor does this manual claim to provide for every possible contingency met in connection
with the installation, operation, or maintenance thereof. Should further information be desired, or should
a particular problem arise which is not covered in sufficient detail, the matter should be referred to
Hi-Force.
