Operating Instruction Manual:
OM-TLA50-01
From Serial Number:
All
15
7.0 Lifting and Transport
7.1 Lifting the Toughlift
•
Before lifting the unit, adjust the handle (
See figure 5.1
) into its forward most locked position (S
ee
figure 7.1
). This places the handle directly over the units’ centre of gravity, allowing it to be safely
lifted by its handle.
•
Attach the lifting strap to the uppermost horizontal beam of the handle assembly (
See figure 7.2
).
IMPORTANT:
A lifting strap with a minimum capacity of 1 tonne and appropriately rated shackles
fitted to each end, must be used.
•
If necessary, attach guide wires to help control the movement of the unit during the lift.
•
The ToughLift unit can now be safely lifted.
7.2 Transporting the Toughlift
•
Make sure the unit is securely fastened down and cannot shift during transport.
Figure 7.1: Handle Position for Lifting the Unit
Figure 7.2: Lifting the Unit
