Hi-Lux Optics
Phenom UHD Spotting Scope
t
13
14
SECTION 8: MAINTAINING YOUR SCOPE
This sight, though amazingly tough, is a precision instrument that deserves reasonable and cautious
care. For normal maintenance:
A.
Do not attempt to disassemble or clean the sight internally.
B.
The external optical lenses should occasionally be wiped with the microfiber lens cloth
provided or optical quality lens paper.
C.
Remove any external dirt or sand with a soft brush so as to avoid scratching the finish.
D.
Wipe the sight with a damp cloth, followed by a dry cloth.
E.
Then go over the metal portions of the sight with a silicon treated cloth in order to protect
the sight against corrosion.
F.
Store the sight in a moisture-free environment.
G.
Avoid storing the sight in a hot place, such as the passenger compartments of a vehicle
on hot days. The high temperatures could adversely affect the lubricants and sealants.
H.
Never leave the sight where direct sunlight can enter either the objective or the eyepiece
lens. Damage may result from the concentration of the sun’s rays (burning glass effect).
WARNING: UNNECESSARY RUBBING OR USE OF A COARSE CLOTH MAY CAUSE PERMANENT
DAMAGE TO LENS COATINGS.
SECTION 9: DIAMONDTUFF GUARANTEE
Hi-Lux, Inc. warranties its products against defects arising from faulty workmanship, or materials,
for the lifetime of the product.
Normal wear and tear is not covered under this warranty policy
.
Any attempt to alter, dismantle or change the standard specifications of the products, will make
this warranty null and void.
This warranty is made to the original purchaser of the goods including all international sales,
and applies only to the products purchased through our authorized distributors or dealers. The
international warranty is subject to approval from our authorized distributor or us directly. The
warranty is transferable.
Warranty obligation is limited to the repair or replacement of any product returned to Hi-Lux,
