InstallationBN48-IP66
Release 01 11/2019
17
3
Switch Access
You can access the switch in any of the following ways:
3.1
Access through Console Port
Open Hyper Terminal in Windows OS. On the computer
’s desktop,
click Start
→
All Programs
→
Accessories
→
Communications
→
Hyper
Terminal.
Enter a name in the pop-up new connection and select an icon for
the connection. After the configuration is complete, click the <OK>
button to make the configuration take effect.
Select the COM port to be used;
Set the number of bits per second to 115200; the data bit is 8; the
parity is none; the stop bit is 1; the data flow control is none, click the
<OK> button to make it effective;
Successfully log in to the console interface of the device. The default
username “admin” and password “admin”.
3.2
Access through Web
Connect the network port of the PC to the RJ45 port of the switch
with an RJ45-RJ45 cable.
Enter the IP address of the switch in the address box of the browser.
The default IP address of the switch is: 192.168.19.16.
The user login interface is displayed. You can log in to the Web UI by
using default user name "admin" and password "admin".
