Qmini M Series Industrial GIS Data Collector Manual
2
Responsibility absolution
Before you use the product, you should read the introduction carefully. Hi-Target surveying
instrument Co. LTD. will not take the responsibility if you do not operate within the product
instruction
。
HI-TARGET surveying instrument Co. LTD. is committed to continuously improve product
function and performance, improve the service quality, and keep the right to change the content
of the instruction without noticing in advance.
We have checked that whether the hardware and software are consistent with the content as the
prints say, but we don't rule out the possibility of bias, the picture in the instruction for reference
only, if you have a product with discrepancies, please refer to the product.
Technology and service
Hi-Target have set up the “technology and service” section in website , if you have
problems you can settle them through the "service guide" telephone
、
contacting regional
technology center and headquarters division or through the "experts on the judgment
seat," "technology BBS" message, we will answer your questions as soon as possible.
Related information
You can find the instructions through the following methods:
1 Purchased products from the Hi-Target will with a CD, open the CD and you can find
the instruction;
2 Land the official website of the Hi-Target, through "downloaded zone"
—
" product
specifications "
—
" GIS product "and you can it.
Your suggestion
If you have any suggestions and opinions about the introduction, please visit the official
website of the Hi-Target, and leave massage in "technical service"
—
"advice and