Qmini series industrial GIS data collector manual
- 18 -
Tips:Lithium battery usage time will decrease as the temperature decrease and charging time
increase.A new 2000 mAh lithium battery can work continuously from 8 to 10 hours.According to wireless
communication setting or different backlight status, continuous work time is more variational.This is
normal.
Charge
Please use the special chargers for charging in certain temperature range, and attain the certain
charging time. Specific use method and requirements: Charge should use special charger of Qmini series
GIS Data Collector at 10
℃
~ 40
℃
temperature range. Normally there is a certain power when using it
first should use the power up then recharge. with first three times should charge for 12 hours,after third
time should charge for 4 hours. If the battery often do not use, must charge once a month.
Figure 4-12 charging diagram
Figure 4-13 Charging diagram Figure 4-14 finish charging diagram
When charging the battery, click Start ->Setup -> Control Panel-> power, can check the remaining
battery real-time, if" remaining power "display 100%, but the" power "part display " charging ", beside the
battery icon in the taskbar display lightning symbol (Figure 4-13), that means the battery is not really fully
charged (see the blue part), unplug the charger, the remaining power may reduce to 85%. Only when the
"power" part display the "main battery" and no lightning symbol in taskbar battery icon is completely
fulfilled charged (see the red part in Figure 4-14).
Charger
