background image

2

SAFETY INSTRUCTIONS

 

IMPORTANT! READ FIRST

For your own safety be sure to read, understand and follow all warnings, safety rules and 

instructions in this instruction manual before using this machine. Failure to do so can 

result in serious personal injury. This instruction manual is intended for the following 

machine models: 20-020, 20-021, 20-023, 20-024, 21-001, 21-002, 21-003 and 21-005.  

Save these instructions

SETUP

• Intended for indoor use only.

• Avoid dangerous environments. 

Do not use 

this machine near gasoline or other flammable 

liquids.

• Make sure machine is securely placed on a 

sturdy, level surface with ample working area 

and away from open electrical outlets.

• Check for damaged parts. 

Before use of this 

machine, always check for any damaged parts 

to determine that it will operate properly and 

perform its intended function. Check for proper 

alignment of moving parts, binding of moving 

parts, breakage of parts, mounting, and any 

other conditions that may affect its operation. A 

part that is damaged must be properly replaced 

through the manufacturer of this machine to 

avoid risk of injury.

• Use only identical All-U-Need parts for 

replacement parts. 

Use of any other parts not 

originally intended for the All-U-Need may create 

a hazard or cause product damage.

• Use only recommended accessories. 

The use 

of improper accessories on this machine may 

cause risk of injury.

• Know your power tool.

 Read this instruction 

manual carefully. Learn the correct applications 

and limitations as well as specific warnings and 

hazards related to this machine.

USAGE

• Always wear proper apparel. 

Do not wear any 

loose clothing, gloves, neckties or jewelry that 

can get caught in the machine’s moving parts. 

Long hair must be secured with a rubber band or 

hair tie.

Summary of Contents for All-U-Need Glass/Crystal

















Reviews: