HE-ZM883R User Manual
PAGE: 53
11. Common Errors & Solutions:
I) PMP can’t be turned on
:
a. Battery may have no power
,
charge PMP’s built-in lithium rechargeable battery.
II) PMP automatically turns off after its power is turned on:
a. Battery capacity is not sufficient and causes PMP to turn off automatically. Please charge the battery
b. The setting of PMP’s automatic power off is set to a low value. Increase sleep time to a higher
number
III) Buttons don’t respond:
a. The HOLD key is in locked position, moving it to the right will unlock the keys
IV) After USB is inserted, no removable disk symbol can be found
:
a.
Make sure the PMP is powered on
b.
Make sure the PMP is connected to the PC using proper USB cable and the cable is hooked