Page 9
Print Options Screen
This is the Print Options screen. It will allow you to adjust the printing options for reports should
you have a printer attached.
You can set the date and time here, set how often a report will be printed, and print a test
print to make sure the printer is working.
BAUD RATE
– This is the rate at which the controller communicates with the external printer.
The rate on the controller must match the rate on the printer to obtain a readable printout. The
controller can communicate with any printer through a serial RS232. Please note that all
reports and information are also being sent to the micro SD card at the rear of the touch
screen. This information will be recorded on the SD card with or without a printer attached. By
default it will record to the SD card in one minute intervals.
