Page 11
Pump Only Calibration Screen
VFD %
- Here you can manually input how fast to run the pump. If the pump is already running
when you adjust the % it will immediately be overridden by the PID.
PID ON
–
PID OFF
- Turns the PID on and off. The PID is what controls the speed of the pump
depending on need. This should only be turned off when first installed and attempting to prime.
AUTO TUNE? – AUTO TUNE ON NEXT RUN
– This will allow the PID to self-adjust its
settings to get the best possible flow rate. Should only be done at factory and at plant
installation.
