4
www.hi-velocity.com
© 1995-2022 Energy Saving Products Ltd.
© 1995-2022 Energy Saving Products Ltd.
12. Now that the motor plug is connected, the control box
can be mounted in place of the large access door. (Figs. 12a,
12b)
Fig. 12a
Fig. 12b
13. Reconnect power & thermostat
connections to the new circuit board.
Hook up ground wire with the provided
wire nut. Refer to wiring diagram on last
page. (Figs. 13a-13c)
14. Double check that all wiring is done correctly according to wiring
diagram. Turn power back on and refer to wiring diagram or to page
30 of the HE-B Install Manual for instructions on how to set fan speed/
airflows. (Fig. 14)
Fig. 13a
Fig. 14
Fig. 13b
Fig. 13c
15. After all fan speed/airflows have been set, the provided coverplate
can be screwed on with provided screws to cover the controls section
of box. (Figs. 15a, 15b)
16. With the cover plate secured, stick the provided wiring diagram sticker to the cover plate for future reference.
Fig. 15a
Fig. 15b
Module HEB-52 WEG
Circuit Box Installation (4/6)
-4-
HE to HE-B-52 Air Handler Control Box Upgrade Installation
