September 2016
Page 25 of 38
EntryProx User Manual, 4045-905, Rev. C.4
7
Card/PIN Programming Sequences
The following command sequences are the most commonly used for programming user data into
the EntryProx.
7.1
Programming PIN and Card
To program a user for both Code AND Card:
1.
Place the EntryProx unit in program mode.
Press:
99 # Master Code *
2.
On the EntryProx keypad
Press:
50 # user-type # user location # keypad PIN
* keypad PIN *
<present card>
3.
Press
*
to exit program mode.
Here is an example with a master code of
2468
and programming user 2 with PIN
1111
:
Press
99#2468*
Press
50#1#2#1111*1111*
<present card>
Press
*
Remember to write an entry in your user list:
“User:2 Type:1 PIN:1111 Card:0056 Name: John Doe”
7.2
Quick Programming PINs or Cards
A “quick program” feature allows user data entry with minimal keystrokes. No command number is
required. This feature programs either a card or a PIN,
not
a combination, and it automatically
selects a “Normal” user access type. Just enter the user’s location and the PIN (or present card):
1.
Place the EntryProx unit in program mode.
Press:
99 # Master Code *
2.
On the EntryProx keypad, for Code Quick Enroll
Press: user location
# PIN * PIN *
OR for Card Quick Enroll press:
user location # **
<present card>
3.
Press
*
to exit program mode.
User Types - Reminder
0-Toggle
1-Normal
2-Download
3-Lockout