September 2016
Page 7 of 38
EntryProx User Manual, 4045-905, Rev. C.4
2.4
Specifications
Category
Requirement
Environmental
Operating
Temperature
–31˚F to 150˚F
(-35˚C to 66˚C) @ 30 VDC
Operating Humidity
5 to 95% relative humidity,
non-condensing
Electrical
Power
Supply/Current
Requirements
10 - 15V DC, linear, filtered and regulated power supply recommended 150 mA
for the EntryProx unit only.
Additional capacity or separate supply required for locking device or
peripherals.
Mechanical
Height
5.25 in (13.3 cm)
Width
2.75 in (7 cm)
Depth
1.625 in (4.1 cm)
Relay Outputs
Main Relay, Aux
Relay
Form C (switches up to 1A inductive load, 2A resistive @ 30VDC)
Sounder
4000 Hz, defeatable
LEDs
Bi-Color (red/green)
Amber
Infrared
2.5
Default Settings
The EntryProx unit is shipped with the following default settings.
Parameter
Default Setting
Master Code (User Location 1)
Code must be changed before programming the unit.
1234*
Main Relay energizes for
5 seconds
Audible Keypress Feedback
ON
Local Propped Door Sounder activates after
30 seconds
Local Forced Door Sounder activates immediately for
10 seconds
Data Output Port
Infrared (IR) port