9.
Ozone Sterilization
Press this button for 2 seconds , the ozone function starts and works for 10 minutes and then stops
；
Or press
twice to stop the function.
10.
Thermostatic Heating
10.1 This Function works only when the water pump surf function is on.
10.2 Press button to start the function, and press“
” or “
”to adjust the temperature.(Temperature setting
range
：
35
℃
--45
℃
).
10.3
Thermostatic heating function starts or stops according to the temperature
（
the temperature that the system
defaults is 37
o
C
）
：
Controlling rule is as follows:
If the temperature
≥
setting temp1
℃，
stop heating
；
If the temperature
≤
setting temperature -1
℃，
start heating.
Panel 2
1
When any function button works, there is a sound of di… di… .
2
Adjusting button
Adjusting button can turn both right and left. It takes cell as unit, turn on cell, one operation was made. Turn right
or turn left can operate the functions.
3
Note of Icons and cursor
- Icons like
are directing icons, all the directing icons are displaying on LCD after power on.
-
is cursor which shows only one on LCD. Turn right,
moves upward, turn left,
moves
downward.
stands for the function is selected, press
to start the function.
-
are function icons, function icon will not display if the function was not selected by cursor; the
function icon will display on LCD if cursor selected it and will blinks if the function was start. Take FM function
as example, if cursor select
, will display on the right side of
, that is
.
4
Power
Press the icon to start the controller, press again to stop the controller.
