Rev. H 11-2021
15
SMA
270
350
450
550
750
950
kW
22,8
24,0
24,0
42,0
49,0
56,0
20
0,3
0,4
0,5
0,6
0,7
0,8
0,9
1
1,1
1,2
1,3
1,4
1,5
30
40
50
60
25
35
45
55
10
15
20
25
30
35
40
45
1000
2000
3000
4000
5000
6000
7000
8000
9000
270-350-450
550-750-950
MTEC.6800.GB-H-1 Operation and maintenance manual SMA series English
SMA
6ZLPPLQJSRROGHKXPLGL¿HUV
3.3.3 Pressure drops of hot water coil hydraulic circuit
3.3.2 Hot water coil correction factors (HOWA)
The hot water coil capacity in different conditions can be obtained multiplying the nominal capacity (See above), by the correction factor
indicated in the table.
The graphic below shows the pressure drops of the hydraulic circuit that includes the hot water coil and the 3 way modulating valve.
Pressure drops (kPa)
+HDWLQJFRLOZDWHUÁRZOK
Nominal capacity
3.3.1 Hot water coil (Accessory)(HOWA)
Correction factors
Difference between water inlet temperature and room temperature (°C)
Performances are referred to the following conditions:
Room temperature 30°C; water temperature 80/70°C, compressor switched off.