Rev. H 11-2021
16
SMA
270
350
450
550
750
950
kW
6
7
7
13
15
17
0,4
0,5
0,6
0,7
0,8
0,9
1,1
1,0
35
40
45
50
10
20
30
40
50
60
200
300
400
500
600
700
800
900
1000
270
350
450
550
MTEC.6800.GB-H-1 Operation and maintenance manual SMA series English
SMA
6ZLPPLQJSRROGHKXPLGL¿HUV
3.3.6 Pressure drops of desuperheater
3.3.5 Desuperheater correction factors
The desuperheater capacity in different conditions can be obtained multiplying the nominal capacity (See above), by the correction factor
indicated in the table.
The graphic below shows the pressure drops of the hydraulic circuit that includes the desuperheater.
Pressure drops (kPa)
:DWHUÁRZOK
Nominal capacity
3.3.4 Desuperheater (Accessory)(RP01)
Correction factors
Desuperheater water inlet temperature (°C)
Performances are referred to the following conditions:
Room temperature 30°C; water temperature 30/35°C, compressor switched off.
Room temperature 32°C
Room temperature 30°C
Room temperature 28°C
