SRH
Swimming Pools Dehumidifiers
MTSRHGB
33
REV.072008
OPERATION MODES
STANDARD:
This operation mode abilitates the refrigerant system for dehumidification.
VENTILATION
This operation mode allows the unit to work in ventilation (compressors will never start), in this modality
dehumidification will not be possible. This modality is used when the unit works on heating only.
OFF:
In this modality the unit is in stand-by.
The combination of the working modes reported above with the choice of the required set point (MAIN , SECONDARY), determines
the various configurations of the unit;
COMFORT:
The operation mode is standard; the set points are the main ones; the unit is working at full load with the
control of temperature and humidity.
ENERGY SAVING:
In this working combination the operation mode is standard; the set points are the secondary ones. This
is the typical operation mode for nigh time or when the pool is not crowded.
HEATING:
The operation mode is ventilation, the set points are the main ones; the unit is working at full load with air
temperature control only (compressors will never start).
PRE-HEATING:
The operation mode is ventilation, the set points are the secondary ones; the unit is working with air
temperature control only.
P07
CONFIG.: COMFORT
Set T: MAIN
Set W: MAIN
Diff. T: MAIN
Diff. W: MAIN
COMFORT: It allows to work with the high performances typical
of the period of high crowding. (T:Air temperature; W: water
temperature).
P08
CONFIG.: COMFORT
Set H: MAIN
Diff.H: MAIN
FUNCT. :
COMFORT: It allows to work with the high performances typical
of the period of high crowding. (H: air humidity).
P09
CONFIG.: ENERGY SAVING
Set T: MAIN
Set W: MAIN
Diff. T: MAIN
Diff. W: MAIN
ENERGY SAVING: It’s normally used during the night or in
absence of crowd. (T:Air temperature; W: water temperature).
P10
CONFIG.: ENERGY SAVING
Set H: MAIN
Diff. H: MAIN
FUNCT. :
ENERGY SAVING: It’s normally used during the night or in
absence of crowd. (H: air humidity).
P11
CONFIG.: HEATING
Set T: MAIN
Set W: MAIN
Diff. T: MAIN
Diff. W: MAIN
HEATING: It can be used when there is no need of
dehumidification; the unit is set on heating only; compressors
will never start.
P12
CONFIG.: HEATING
Set H: MAIN
Diff. H: MAIN
FUNCT. :
HEATING: It can be used when there is no need of
dehumidification; the unit is set on heating only; compressors
will never start.
Summary of Contents for SRH Series
