3) Multiport Valve Replacement Parts
Item
Product Description
Qty
1
Handle (Big)
1
2
Pin for Handle
1
3
Washer for Handle
1
4
M6*30 Screw with Nut for Standard Lid
6
5
1.5" Top Mount Valve Standard Lid (Black)
1
6
O-ring for 1.5" Valve Lid
1
7
Washer for Spring
1
8
Spring for 1.5" Top Mount Valve
1
9
O-ring for 1.5" Valve Rotor
2
10
1.5" Valve Rotor
1
11
Spider Gasket
1
12
1.5" Top Mount Valve Bottom Body Clamp (black)
1
13
1.5" Diffuser
1
14
O-ring for Diffuser
1
15
1.5" Top Mount Valve Over Drain Diffuser
1
16
O-ring
1
17
O-ring for 1.5" Connector
3
18
1.5" Connector (Black)
3
19
O-ring for 1.5" Union
3
20
1.5" Union (A/E)
2
21
1.5" Union Nut (black)
3
22
1.5" Union with sight glass (short)
1
23
1.5" Union with sight glass holder
1
24
Connector for pressure gauge/stopper
1
25
Drain Plug with O-ring
1
26
Pressure Gauge with O-ring (40psi)
1
5. Valve Positions Function
Valve Position
Function
FILTER
Normal Filtration and Vacuum
BACK WASH
Clean Filter by reversing the flow
RINSE
Use after backwash to flush dirt from valve
WASTE
By-passes filter, use to vacuum the waster for lowering water level
RECIRCULATE
By-passes filter for circulating water to pool
CLOSED
Shut off all flow to filter or pool
6.Warning
1. THIS FILTER OPERATES UNDER HIGH PRESSURE. WHEN ANY PART OF THE
CIRCULATING SYSTEM (e.g. CLAMP, PUMP, FILTER, VALVES, ETC.) IS SERVICED, AIR
CAN ENTER THE SYSTEM AND BECOME PRESSURIZED. PRESSURIZED AIR CAN CAUSE
THE LID OR VALVE TO BE BLOWN OFF WHICH CAN RESULT IN SEVERE INJURY,
DEATH, OR PROPERTY DAMAGE.
2. TURN PUMP OFF BEFORE CHANGING VALVE POSITION.
3. TO PREVENT DAMAGE TO THE PUMP AND FOR PROPER OPERATION OF THE
SYSTEM, CLEAN PUMP STRAINER AND SKIMMER BASKET REGULARLY.
4. DO NOT UNSCREW SCREWS OF FLANGE CLAMP WHILE PUMP IS RUNNING.
Figure 4