WARNING
1. Only a licensed or certificated electrician or a qualified serviceman is allowed to install or
maintain this product.
2. Must be installed in accordance to the requirements of your government standard or local
authorities.
3. Never handle it with wet hands and feet.
4. This light is design for use only when fully submerged in water.
5. Never operate this light for more than 1 minute unless it is totally submerged in water.
6. All lights are required to be disconnected from the main electricity before any operation of
maintenance.
7. Maximum depth range for the light installation: 1
～
10 meter.
8. Maximum water temperature range for the light: -20
℃～
35
℃
.
1. Technical Parameters
Power :
□
12V
□
24V
□
AC
□
DC
Power :
High Power LED
□
1W
□
3W
Dimensions (mm):Φ62*95mm
1
SS Body cover
Silicone seal ring
Glass lens
LED light source
Cable
Embedded parts
SS Body
SS fixed components
SS inlet nut
