TEST BEFORE INSTALLATION
Step1
Test car stereo:
①
The red and yellow wires of the car stereo combine together firstly and then
connected to the positive pole of the battery.
②
The black wire is connected to the negative pole of the battery.
③
2 seconds later, check the car stereo, if the screen is lighting up, it means the car
stereo is proper functioning.
A quick simple test before the installation is to confirm that the device is working normally
and as expected. In case there is a wrong step in the subsequent installation, which
causes it to fail to work. If you perform a successful test but the unit did not work after
installing it please recheck the installation steps.
Operating voltage more than 14V should buy an extra adapter.
①
①
②
- 06 -
- 07 -
CVBS Video input/Front Camera
TV BOX
Monitor
Audio output
Video output 1/2
CVBS Video input
/ Front Camera
Right
Right
Left
Left
......................
......................
......................
............
..........
......................
.................
......
...
...
......................
...................
..............
............
............
..........
..........
.......... ......
.............
....
........
..
......
..
......
Connect Pink
Reversing Trigger Wire
Reversing Light 12V +
Reversing Light
Black Wire:Ground -
Red Wire:
Summary of Contents for CP7-9
