DOCK-1 Owner’s Guide
Contents
Basics
Operation
Other Information
Remote Control Battery Replacement
：
Appendix
1. Unscrew the four screws mounted on the back cover of the remote control first and then remove the
back cover
;
2. Unscrew the four screws fixing the circuit board and remove the circuit board
;
3. Replace the battery on the back cover of the circuit board. The model of the battery is CR2032 3V
lithium-ion button battery;
4. Fix the circuit board and the four screws. Then install the back cover and the other four screws.
12
①
②
③
④
