background image

HIGH PERFORMANCE AMPLIFIERS

HIFONICS GLADIATOR

                             INDEX                                                                                                                      PAGE

The Gladiator Series products have been designed to a very high level of performance, with features unavailable in 
any other product. All of the amplifiers have variable crossovers built in, with added touches such as subsonic 
filter, bass equalization and an HFR-3 remote control module for the monoblocks that allows overall Level control 
from reach of the drivers seat.

To insure years of listening pleasure, all amplifiers have a built in diagnostic mode that will detect shorted speaker 
leads, low impedance, dangerous high temperatures, DC shorts and will shut down the amp to help prevent 
damage.

General Installation Procedure............................................................................................................................................1

AMPLIFIER FEATURE DESCRIPTIONS...............................................................................................................................2
GLX60.4 / GLX100.4 / GLX1000.1D / GLX1400.1D / GLX1800.1D / GLX2200.1D

GLX60.4 / GLX100.4 Applications.....................................................................................................................................3-4

GLX1000.1D / GLX1400.1D Applications.............................................................................................................................5

GLX1800.1D Applications.....................................................................................................................................................6

GLX2200.1D Applications.....................................................................................................................................................7

Setting up systems after installation for best performance.............................................................................................8

Trouble Shooting and Diagnostics......................................................................................................................................9

Features and Specifications...............................................................................................................................................10

Product Warranty.................................................................................................................................................................11

The contents of this manual may not be reproduced or copied with out the written consent of MAXXSONICS USA, Inc.

Check out our videos of new products,

events and technical tutorials at

www.youtube.com/maxxsonicsusainc

Summary of Contents for Gladiator GLX100.4

















Reviews: