44
For additional technical information on this and all HIFONICS products, go to t
he “SUPPORT” tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
Next, use your Sharpie to mark the mount holes on the painters tape. Repeat the mounting
process for the other pod shown in FIG 14-2.
(FIG 14-2)
STEP 2 - Drill (4) 5/16 inch holes into the fender where you marked the tape shown
in FIG 14-3.
(FIG 14-3)