background image

High-Flying

HF-LPT100 Low Power WiFi Module User Manual 

Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)

 

- 9 - 

1.

 

PRODUCT OVERVIEW 

1.1.

 

General Description 

The HF-LPT100 is a fully self-contained small form-factor, single stream, 802.11b/g/n Wi-Fi module, 

which provide a wireless interface to any equipment with a Serial/PWM interface for data transfer.HF-

LPT100 integrate MAC, baseband processor, RF transceiver with power amplifier in hardware and all 

Wi-Fi protocol and configuration functionality and networking stack, in embedded firmware to make a 

fully self-contained 802.11b/g/n Wi-Fi solution for a variety of applications.  

The HF-LPT100 employs the world's lowest power consumption embedded architecture. It has been 

optimized for all kinds of client applications in the home automation, smart grid, handheld device, 

personal medical application and industrial control that have lower data rates, and transmit or receive 

data on an infrequent basis.  

The HF-LPT100 integrates all Wi-Fi functionality into a low-profile, 23.1x32.8x 2.7mm SMT module 

package that can be easily mounted on main PCB with application specific circuits. Also, module 

provides built-in antenna, external antenna option. 

1.1.1

 

Device Features 

 

Single stream Wi-Fi @ 2.4 GHz with support for WEP security mode as well as WPA/WPA2  

 

Based on Self-developed High Cost Performance MCU 

 

Ultra-low-power operation with all kinds of power-save modes.  

 

Includes all the protocol and configuration functions for Wi-Fi connectivity.  

 

Support STA/AP/AP+STA Mode 

 

Support Smart Link Function 

 

Support Wireless and Remote Firmware Upgrade Function 

 

Support External I-PEXor Pad Interface  antenna connector options.  

 

Support Dial Switch to Control Power

(Reserved)

 

Support Max 3 Channel PWM Output 

 

Compact surface mount module 22mm x 13.5mm x 6mm  

 

Full IPv4 stack.  

 

Low power RTOS and drivers. 

 

FCC Certified.  

 

RoHS and CE compliant.  

 

Single supply 

– 3.3V operation.  

 

 

Summary of Contents for HF-LPT100















































































Reviews: