High-Flying
HF-LPT100 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 41 -
+ok=<status><CR><LF><CR><LF>
4.2.2.11.
AT+Z
Function: Re-start module;
Format:
AT+Z<CR>
4.2.2.12.
AT+H
Function: Help;
Format:
Query Operation
AT+H<CR>
+ok=<command help><CR><LF><CR><LF>
Parameters:
command help: command introduction;
4.2.2.13.
AT+CFGRD
Function: Batch Read User Configure Parameters;
Format:
Query Operation
AT+CFGRD<CR>
+ok=<config><CR><LF><CR><LF>
Parameters:
config: the first two bytes means the length of configuration parameters;
4.2.2.14.
AT+CFGWR
Function: Batch Write User Configure Parameters;
Format:
Set Operation
AT+CFGWR=<config><CR>
+ok<CR><LF><CR><LF>
Parameters:
config: the first two bytes means the length of configuration parameters;
4.2.2.15.
AT+CFGFR
Function: Batch Read Factory Default Configure Parameters;
Format:
Query Operation
AT+CFGFR<CR>
+ok=<config><CR><LF><CR><LF>
Parameters:
config: the first two bytes means the length of configuration parameters;
4.2.2.16.
AT+CFGTF
Function: Copy User Parameters to Factory Default Parameters;
