High-Flying
HF-LPT100 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 51 -
Query Operation
AT+WSDNS<CR>
+ok=<address><CR><LF><CR><LF>
Set Operation
AT+WSDNS =<address><CR>
+ok<CR><LF><CR><LF>
Parameters:
address: STA’s DNS server address; Effective right away.
4.2.2.45.
AT+LANN
Function: Set/Query
AP’s network parameters. Setting is valid after reset.
Format:
Query Operation
AT+LANN<CR>
+ok=<ipaddress,mask><CR><LF><CR><LF>
Set Operation
AT+LANN=< ipaddress,mask><CR>
+ok<CR><LF><CR><LF>
Parameters:
ipaddress:
AP’s IP address;
mask:
AP’s net mask;
4.2.2.46.
AT+WAP
Function: Set/Query AP Wi-Fi parameters. Setting is valid after reset.
Format:
Query Operation
AT+WAP<CR>
+ok=<wifi_mode,ssid,channel><CR><LF><CR><LF>
Set Operation
AT+WAP =<wifi_mode,ssid,channel><CR>
+ok<CR><LF><CR><LF>
Parameters:
wifi_mode: Wi-Fi mode, include:
11B
11BG
11BGN (Default Value)
ssid:SSID at AP mode
channel: Wi-Fi channel selection:
AUTO
CH1~CH11; (Default CH1)
4.2.2.47.
AT+WAKEY
Function: Set/Query AP Wi-Fi secruity parameters. Setting is valid after reset.
Format: