High-Flying
HF-LPT100 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 52 -
Query Operation
AT+WAKEY<CR>
+ok=<auth,encry,key><CR><LF><CR><LF>
Set Operation
AT+WAKEY=< auth,encry,key><CR>
+ok<CR><LF><CR><LF>
Parameters:
auth: include
OPEN
WPA2PSK
Encry: include
NONE: When
“auth=OPEN” available;
AES:
When “auth=WPA2PSK” available;
key: security code, ASCII code, smaller than 64bit and bigger than 8 bit;
4.2.2.48.
AT+WAMAC
Function: Query AP MAC address parameters;
Format:
Query Operation
AT+WAMAC<CR>
+ok=<mac_address><CR><LF><CR><LF>
Parameters:
mac_address:
AP’s MAC address;
Note: Module AP mode
’s MAC address is related to STA mode’s MAC address. If user need
changeto others, please contact with high-flying technical people.
4.2.2.49.
AT+WADHCP
Function: Set/Query AP DHCP server status; Setting is valid after reset.
Format:
Query Operation
AT+WADHCP<CR>
+ok=<status><CR><LF><CR><LF>
Set Operation
AT+WADHCP=<status><CR>
+ok<CR><LF><CR><LF>
Parameters:
status:
AP’s DHCP server function status:
on:DHCP Server Open;
off:DHCP Server Close:
4.2.2.50.
AT+WADMN
Function: Set/Query AP webpage domain name;
Format:
Query Operation
