High-Flying
HF-LPT100 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 54 -
CN: Chinese Version (Default);
EN: English Version;
4.2.2.54.
AT+UPURL
Function: Set/ Query remote upgrade URL address;
Format:
Query Operation
AT+UPURL<CR>
+ok=<url> <CR><LF><CR><LF>
Set Operation
AT+UPURL=<url,filename> <CR>
+ok<CR><LF><CR><LF>
Parameters:
url: the upgrade file url address; the
last charter shall be “/” (within 20 characters).
filename: the upgrade file name, it’s optional and not saved parameter. If provide
this file name here, the module will start upgrade right away;
4.2.2.55.
AT+UPFILE
Function: Set/ Query remote upgrade configure file name;
Format:
Query Operation
AT+UPFILE<CR>
+ok=<filename> <CR><LF><CR><LF>
Set Operation
AT+UPFILE=<filename> <CR>
+ok<CR><LF><CR><LF>
Parameters:
filename: the upgrade configure file name (within 20 characters).
4.2.2.56.
AT+LOGSW
Function: Open/Close remote upgrade logfile
Format:
Query Operation
AT+LOGSW<CR>
+ok=<status><CR><LF><CR><LF>
Set Operation
AT+LOGSW=<status><CR>
+ok<CR><LF><CR><LF>
Parameters:
status:
on: Open. The UART Port will print some upgrade status when upgrading. the
log file will be sent to UDP Port after successfully
off: Close.