High-Flying
HF-LPT100 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 55 -
4.2.2.57.
AT+LOGPORT
Function: Set/Query remote upgrade UDP port of log file.
Format:
Query Operation
AT+LOGPORT<CR>
+ok=<port><CR><LF><CR><LF>
Set Operatioin:
AT+LOGPORT =<port><CR>
+ok<CR><LF><CR><LF>
Parameters:
port: The remote upgrade UDP port of log file.
4.2.2.58.
AT+UPST
Function: Start remote upgrade;
Format:
Query Operation
AT+UPST<CR>
+ok=<log> <CR><LF><CR><LF>
Parameters:
log: feedback the status of remote upgrade;
Note:
After execute this command, the HF-LPB100 will automatic start upgrade base on the
setting of UPURL, UPFILE command contents;
4.2.2.59.
AT+WEBU
Function: Set/ Query webpage user name and password; Setting is valid after reset.
Format:
Query Operation
AT+WEBU<CR>
+ok=<username,password> <CR><LF><CR><LF>
Set Operation
AT+WEBU=<username,password><CR>
+ok<CR><LF><CR><LF>
Parameters:
username: User Name, within 15 characters, not support empty.
password: password, within 15 characters, support empty.
4.2.2.60.
AT+MSLP
Function: Set/Query deep sleep/standby mode parameters;
Format:
Query Operation
AT+MSLP<CR>
+ok=<ret><CR><LF><CR><LF>
Set Operation
AT+MSLP=<mode><CR><LF><CR><LF>
