Friday, April 19, 2019
8
＜
5%
Flashing
Off
Off
Off
Aircraft startup/shutdown instructions
Startup: Insert the aircraft battery into the aircraft battery compartment after it is
turned on (please insert the battery into battery compartment within 30 seconds after
it is turned on, otherwise the battery will be turned off automatically), a sound of
aircraft startup will be given, and the light will be turn on, indicating the successful
startup.
Shut down: unplug the battery directly to shut down.
Restart: It can be restarted by the upper computer or unplugging the battery.
飞机校准与灯语
Aircraft calibration and lamp signal
I. Non-calibration status lights
1. After inserting USB and connecting successfully, the white light flashes at high
frequency for 2 seconds. (All lights can be interrupted, and they will return to their
original state after flashing for 2 seconds)
2. When the battery level is less than 5%, it flashes red
3. Hardware failures such as IMU, barometer or magnetometer: white, blue and
purple flash.
4. Server is not connected: the white light is normally on
5. Upgrading the flight control and transmitting the dance steps: the purple light is
normally on (in case the communication is occupied in the process of upgrading or
transmitting, the instructions of the upper computer may not be processed)
6. Automatic numbering
6.1) Activate the automatic numbering function, calibrate the No. 0 aircraft, on which
the red, green and blue lights alternate rapidly. When the numbering is completed
over 90%, the server will send a light control instruction, commanding the same light
color to be displayed in the same row or in the same row and lighting red, green, and
the secondary shift control will be performed on the lights in the same row or in the
same row (to prevent dead lights, the rows and columns are of the same color)
6.2) Series numbers that are not within the specified range of dance steps (i.e., the
number of aircrafts are more than the number of dance steps): orange-red (RGB:
255, 61, 0) lights will be normally on.
6.3) After automatic numbering is stopped, all lights return to their original state.
* Note: In the process of number matching, if the first, second, third, fourth and fifth
lights with high priority appear in an aircraft, the automatic numbering lamp signal will
be lit according to the lights with high priority.
7. Manually modify the serial number (including matching the serial number through
USB), and the blue color is normally on for 4 seconds after successful matching.
8. When the upper computer selects the aircraft, the orange-red (RGB: 255, 61, 0)
light flashes; when the selection is closed, the light goes off; if there is an instruction
from the upper computer, it will light up according to the instruction.
9. Prepare for take-off: the forest green is normally on.
10. Countdown to take-off: the indigo is normally on.
