background image

___________________________________________________________________________________________

20

 

www.hightechpet.com 

High Tech Pet Products, Inc.

WATER RESISTANCE

The High Tech MS-4 ultrasonic transmitter collar is water resistant meaning 
that rainy weather and humidity will not damage the unit.  These collars are 
NOT designed to be fully immersed in water.  Should this occur, simply open 
the unit, shake out water and let dry.  In most cases the unit will function 
normally.  However the life of the battery will likely be reduced or the bat-
tery may require replacement.
The MS-5 collar is fully waterproof to a 3 foot depth.

TRAINING YOUR PET

Training your pet to use its new POWER PET door should be a relatively 
 effortless task.  Some pets may become startled by the sound and move-
ment of the panel, but be patient.   Nearly every pet will soon be used to the 
POWER PET’S operation and learn to love using its own personal entry.   We 
recommend that you lead your pet to the door and allow it to open sev-
eral times to teach the animal the cause and effect relationship between 
pet and door.  Then place a food reward on the opposite side and lead the 
animal through the opening, allowing it to get the reward on the other side.  
Repeat several times.  Before too long your pet will get the idea.  If your pet 
doesn’t get it in one sitting, remain patient and let your pet just walk around 
on its own for awhile.  It won’t take too much more time for your pet to 
realize the POWER PET opens whenever the pet comes its way.  One of the 
most frequent comments we hear from POWER PET owners is how much 
their pets love using their POWER PET door.  We are sure your pet will feel 
the same!

REPLACEMENT PARTS

Over the years you may need to replace damaged or worn out parts.  High 
Tech Pet Products offers complete refurbishment of the door at our facility 
in Ventura CA.  Contact Customer Service for instructions on shipping your 
door back to us. For customers with the mechanical skills to refurbish them-
selves, we offer many replacement parts on our web site, www.hightechpet.
com along with do-it-yourself instructions.

Summary of Contents for Power Pet





























Reviews: