10
CAUTION
• If this wood heater is not properly installed, a house
fi
re may result. To reduce the risk of
fi
re follow
all instruc ons, cau ons, and safety no ces contained herein.
• Installa on must also meet all State and Local Code requirements and/or restric ons. Check with your
local Building O
ffi
cial, Fire O
ffi
cial, or other Authority Having Jurisdic on (AHJ) regarding the need to ob-
tain a permit prior to installing a wood heater; and whether an inspec on of the installa on is required
upon comple on.
• Don’t take shortcuts, use or allow makeshi methods, or other compromises in the installa on. Safety
is paramount and the key to enjoying your new wood heater.
• We strongly recommend installa on by an experienced professional installer who has the specialized
knowledge, tools, and equipment to complete the installa on safely. Look for an installer who is cer -
fi
ed by the The Na onal Fireplace Ins tute (NFI) as a Woodstove Specialist or Master Hearth Profession-
al (MHP) to have demonstrated their mastery of the knowledge required in all phases of safe woodstove
installa on, and of best current industry prac ces.
• Be sure to contact your insurance company to inquire whether they have addi onal requirements.
I
Your High Valley stove was carefully inspected before being packaged at the factory. Chances are that your High Val-
ley Dealer has un-boxed and assembled your stove prior to delivery. Your dealer has the equipment and the experi-
ence to handle heavy stoves. If you have taken delivery of your Model 1300 stove s ll in the box proceed as follows:
• Carefully remove the shipping materials. Use cau on. The contents are heavy.
• Carefully inspect the stove and accessories, if any, for signs of damage.
• If any damage is noted or suspected please contact your High Valley Dealer for assistance.
• DO NOT proceed with installa on un l the stove has been inspected and replacement parts obtained.
P
I
If your Model 1300 was not assembled before delivery, the stove body must be fastened to the pedestal base.
USE
EXTREME CAUTION.
The wood heater is very heavy. At least two strong individuals will be needed to li the stove
body onto the pedestal base. Personal injury and/or damage to the stove or personal property may result if the
stove is handled improperly. If you have concerns about handling the stove please contact your dealer for assistance.
M
I
:
Stove Body, Pedestal Base, four (4) each 3/8" - 16 x 1" bolts, Owner's Manual.
• Place the un-boxed pedestal on the
fl
oor close to where the stove will be installed.
Place a piece of cardboard under the pedestal base to protect the
fl
oor while assembling the stove.
• Carefully
li the Model 1300 stove body and place it gently top of the pedestal.
○
Do not drop the stove body onto the pedestal base. Damage to the
fl
oor, the
fl
oor covering, or the
fl
oor
protector may result.
○
Ensure that the stove body is roughly centered on the pedestal.
• Align at least one of the holes in the pedestal with threads in the stove with appropriate holes in pedestal.
○
Insert one of the 3/8 -16 x 1" bolts through the hole in the pedestal base and into the threaded hole in
the stove body. Tighten
fi
nger ght only at this stage.
○
Pivot the stove body carefully on the pedestal base to align the remaining three bolt holes.
○
Thread the remaining 3/8 -16 x 1" bolts into the threaded holes in the stove body.
• Tighten the four (4) bolts securely using a 9/16" or 14mm wrench, an adjustable wrench, or similar tool.
B
I
The Blower is a standard feature on the Model 1300 and is installed at the factory.
• The Blower is pre-wired at the factory, so no addi onal wiring is necessary in the
fi
eld.
• If removal or replacement of the Blower is needed in the future, a wiring diagram is provided on Page 16.
P -I
A