DTS-60A / DTS-100A O
PERATORS
M
ANUAL
2.
Verify Electrode/Gap Spacing
, Figure 1.6a/b.
This warning message is displayed at the startup of every test procedure, in order to
remind the user to check the electrodes type and spacing, according to the selected
test. If the selected test is a Standard Test or User Defined Test one (where the
spacing and the type of the electrodes is specific) the message will inform the user
for the appropriate settings (type, spacing), Figure 1.6a. The user may proceed by
pressing the
‘ENTER’
key.
Warning Message
TEST READY...
TIMER:00:00:00
TEST:ASTM-D1816/84
Electrodes:
Spacing:0.04in
ENTER > PROCEED TEST
Figure 1.6a –
’Electrodes/ Space’ Warning Message
If the selected test is the Simple Test (where the spacing and the type of the
electrodes is not specified) the message will remind the user to verify the desired
electrode type and spacing, Figure 1.6b. The user may proceed by pressing the
‘ENTER’
key.
Warning Message
MENU > GO TO MENU
TEST:SIMPLE TEST
VOLTAGE: 0.5 kV/s
TIMER:00:00:00
Verify Electrodes
Figure 1.6b
– Verify Electrode/Gap Spacing’ Warning Message
9
Summary of Contents for DTS-100A
Page 92: ......
