Chapter 2 Hardware Installation Page 3
Typical Application
HWW-3050 IEEE802.11n (Draft 2.0) 2.4GHz Wireless Broadband Router can be configured in a
variety of network system configurations.
Wireless Infrastructure
In a wireless infrastructure, HWW-3050 can act as an Access Point with repeater. The Access Point
connects the wireless clients together. The Access Point acts as a center point for all wireless
communications. This would increase efficiency of the communications since the wireless adapters
do not need to be within direct range of each other.
Wireless Infrastructure with Stations Attaching to a Wired LAN
The IEEE 802.11n (Draft 2.0) 2.4GHz Wireless Broadband Router will provide access to your local
LAN. An integrated wireless and wired LAN is called an Infrastructure configuration. A group of
wireless LAN PC users and an Access Point construct a Basic Service Set (BSS). Each wireless
PC in this BSS can talk to any computer on your network via the Access Point.
Connecting the Wireless LAN Micro Access Point to your network
Connecting with Cable/DSL mode, the IEEE 802.11n (Draft 2.0) 2.4GHz Wireless Broadband
Router provides you high speed broadband-sharing gateway. A typical Internet access application
of the Wireless LAN Access Point is shown below:
Figure 1 The Wireless Broadband Router Application