3 of 7 pages
Jumping mode set
~
Select the built-in jumping mode
Speed set
~
Adjust the speed of the dreaming/snap
program mode
AUTO
RUN
MODE
Zoom
~
Adjust the beam angle from big to small
Static Color select
~
Select the 15 static colors
Strobe
~
Adjust the strobe speed,
is flash
off,
is slowest,
is fastest
STATIC
COLOR
SELECT
MODE
Zoom
~
Adjust the beam angle from big to small
LED digital tube display always on
Display
on/off
LED digital tube display off
LED digital tube display normal
Display
normal/inversed
LED digital tube display inversed
Initialization
mode
Initialize the unit at the extra factory setting
OTHER
MODE
Reset mode
Reset the position of the electric machine
Manual Dimmer Color Mode
1. Press MODE button until you select red dimmer color r(XXX). Continue pressing the SET UP to
choose different color,green G(XXX), blue b(XXX) or white u(XXX).Then continue pressing the SET
UP to select strobe mode FS(XX) and the zoom mode Z.(XXX).
2. Press UP or DOWN to adjust the intensity of the red,green,blue or the white color 0-255 ,the speed of
the strobe in the strobe mode and the beam angle from big to small.
0-Off Strobe 1-Lowest Speed 15-Highest Speed
Static Color Select Mode
1.
Press MODE button until you select CL(XX). Then continue pressing the SET UP to select strobe
mode St(XX) and the zoom mode Z.(XXX).
2.
Press UP or DOWN to select static color 0-15 ,the strobe speed in the strobe mode and the beam
angle from big to small.
0-Off Strobe 1-Lowest Speed 15-Highest Speed
Auto-Run Program Mode
Two Auto-Run styles are built into the YHLL-001Z 4 in 1– Continued Color change program(AJ-X), Color
Mixing (AF-X).
1. Press “MODE ” button until you select AJ-(X) .Continue pressing SET UP to choose Color Mixing
AF-(X),and continue pressing SET UP to reach the SP(XX) Auto-run Speed Set Mode and the zoom
Mode Z.(XXX).
2.
Press UP or DOWN to select the built-in AJ-(X) Continued Color change program 1-8 ,the built-in
