—
—
5
Materials Heavy Medium Light
Thread(Ref.)
Polyester
Cotton
Vinylon #30 or more
Polyester #50 to #60
Polyester
#50 to #60
Cotton
Vinylon #50 to #80
Refer to the table above, and adjust according to the stitching conditions, the material and thread
5) Adjusting of pressure of presser foot
Pressure of the presser foot can be adjusted by
turning the pressure regulating thumb screw
6) Adjusting of thread tension
7)Adjusting of upper thread tension
(1) Upper thread tension can be adjusted by thread
tension nut.
(2)Upper thread is to be adjusted according to the lower
thread tension.
(3)For special fabric sewing with special thread, the de-
sired tension can be obtained by adjusting the strength
and operating range of thread take-up spring.
8)
Adjusting of lower thread tension
(1) Lower thread tension can be adjusted by screw (A).
(2)
In the case of cotton thread #60, the thread ten-
sion can be checked as the following. Hold the
end of pulled out thread and if the bobbin case
fall slowly, the tension is proper.
Summary of Contents for GC1998-MCDZ
