—
2
—
3. PREPARATION BEFORE STARTING TO OPERATE
1) Connection of control box
It shows the connection of the
electrical wires of the whole machine
on the right picture.
When the machine needs to be
assembled, each line should be linked
to the right joint according to the
instruction of the picture.
All the pins on the control box
have signals of function showing, and
usually, different wires have different
kinds of joint.
Caution
: the pin of synchronizer wire is
the same with another two external pins
and if there is a misconnection, the
synchronizer might be burn.
When connecting the pipes, please check the
joint at the picture of the whole machine above
as reference.
And also there have an instruction mark of
each joint of the solenoid at the setting board.
From the library of: Superior Sewing Machine & Supply LLC
