—
4
—
the upper thread tension adjuster, and the upper thread can easily pulled out
6. Setting of bobbin
1
）
Pulling out 5. cm thread tail from the bobbin.
2
）
Hold the bobbin so that the bobbin thread is would in right direction and put it into the hook.
7. Threading of bobbin threads
1
）
Put the hook into the bobbin case and press down the latch
①
.
2
）
While holding the two needle threads by left hand, rotate the hand-wheel one turn by right hand.
By pulling up the needle threads, as shown in the figure, the bobbin threads will be lifted.
Each combination of bobbin thread and needle thread should be aligned and led backward.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
