132
Copyright © 2011-2019 by Highly Reliable Systems, Inc. All rights reserved.
Disk Identification
Disk ID
Unique ID assigned to each disk when they are formatted.
Alt ID
Unique ID assigned to the disk by the system. This ID is generated by system using the disk's
vendor, model number, serial number, and bus connection. A given disk may get a different 'Alt
ID' if it is connected to a different bus (e.g. eSATA vs. USB3).
Friendly Disk Name
User defined disk name.
Click 'Confirm' to seed a RAID disk from the selected disk or 'Cancel' to cancel the operation.
3.4.9 Create RAID Disk (NetSwap/RAIDFrame Plus only)
Create a new RAID disk from physical disks.
Illustration 109: Create RAID Disk
Available Disks
Select the disks to be configured into a RAID Disk. For RAID 1, you should also select one of the
disks to be the “master” or the disk that is not removed.
Note: To create a RAID 1 (mirror) with a specific disk as the master disk, create the RAID Disk with
only the master disk selected. Then after the RAID Disk is created add the remaining disks to the RAID
Disk using the 'Add Disk' button on the 'RAID Properties' screen as shown below. This will preserve
any data that may be on the master disk.