4
SRD7101P&PB Hardware Installation
Step 1.
Carefully remove the SRD7101P (or SRD7101PB) from the
box.
Step 2.
Power off the motherboard and locate the PCIe slot (x16).
Figure 1 - PCIe x16 slot diagram
Note: Please consult your motherboard manual for more
information about the system’s PCIe configuration.
Step 3.
Align the Host Interface of the SRD7101P (or SRD7101PB)
with the PCIe slot and gently press it in.
Note: Please make sure the AIC Drive is securely installed before
powering on the system. A loose connection will prevent the AIC
Drive from functioning properly.
