22
Creating a Bootable Array (Mac Only)
A bootable array differs from a data array simply from the fact that you install and boot your
operating system from the RAID array you created.
For
Mac
Users:
1.
You must have an existing installation of the Mac operating system installed.
2.
Set up the RS6314A normally by
See setting up the hardware
How to install the WebGUI
How to create an array
3.
Once an array is created, the logical volume can be seen by your operating system
4.
Use a 3
rd
party disk cloning tool to copy your bootable drive onto the logical drive you
just created.
For
Windows
Users:
Booting from Windows is currently not supported on RS6314A.
Installing HighPoint WebGUI
HighPoint Web RAID Management Software (WebGUI) is used to monitor and configure your
hard disks and RAID arrays attached to HighPoint RocketRAID controllers.
The software package must be installed on system with supported HighPoint RocketRAID
controllers installed, and the device driver must be loaded to run the service. A web browser
with XML support is required on the client side, e.g. Internet Explorer, Mozilla, FireFox or
Google’s Chrome.
New features are continually added to the interface; update to the latest version at
http://www.hptmac.com/series-rs6314a-resources.php
1.
Locate the HighPoint WebGUI Setup on our website
http://www.hptmac.com/series-rs6314a-
resources.php
and download the file
2.
Extract the files from the archive
3.
Double click on “HighPoint RAID Management.exe”
4.
Follow the on screen steps to install our software.
Summary of Contents for RocketStor 6314A
Page 1: ...1 RocketStor 6314A User Manual Sept 25 2015 Revision v1 02 HighPoint Technologies Inc...
Page 13: ...13...
Page 18: ...18...