For information on Care and Cleaning or to register your
highwood
product, please visit www.highwood-usa.com
.
IMPORTANT!
A MINIMUM of (2) people are required to assmble this product.
DO NOT expose components to direct sunlight prior to assembling.
Remove components from the box as they are needed for assembly.
DO NOT fully tighten the bolts until all bolts are started.
Once all bolts are inserted, go back & tighten all bolts.
Ensure all pre-drilled holes are clear of any debris.
This will allow for easier assembly.
Retain these instructions for future reference
INCLUDED HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
CUSTOMER-SUPPLIED HARDWARE
INCLUDED TOOLS
CUSTOMER-SUPPLIED TOOLS
PAGE 2 of 16
A
B
C
D
E
F
#8 x 1.00"
#7 x 3.00"
#7 x 2.25"
1/4"-20 X 2.00"
1/4"-20 X 1.25"
x16
x96
x16
x56
x16
x8
5/32" HEX BIT (Bolts A , B )
#2 SQUARE BIT (Screw E )
T15 TORX BIT (Screws C , "D")
ANCHORS SUITABLE FOR THE INSTALLATION
SURFACE (MAX.
5
16
" DIAMETER).
x16
CORDLESS DRILL/SCREWDRIVER
LADDER
LEVEL
TAPE MEASURE
1
8
" DRILL BIT
TOOLS NECESSARY FOR CUSTOMER-SUPPLIED ANCHORS
AD-PGLA-1010
12.20.19
