User Manual of DS-1100KI Network Keyboard
38
should click the Set button to configure the triggered alarm output (s).
9.
After having configured the above setting and if you want to configure the other cameras with the same
settings, choose the camera and click
Copy
. You can also select
All
to copy the current settings to all cameras.
10.
Click
Apply
to save the current settings and
Cancel
to return to the previous interface
Configuring Privacy Mask
You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator.
Steps:
1.
On the Camera Settings interface, click
Set
beside Privacy Mask to enter the Privacy Mask Settings interface.
2.
Select the camera for configuring privacy mask.
3.
Click the checkbox of
Enable
item to enable privacy mask.
4.
Click the
Set
button beside Area Settings to set privacy mask area. Please refer to the settings of motion
detection area.
5.
After having configured the above setting and if you want to configure the other cameras with the same
settings, choose the camera and click
Copy
. You can also select
All
to copy the current settings to all cameras.
6.
Click
Apply
to save the current settings and
Cancel
to return to the previous interface.
Configuring IPC Management
If the current Encoder device is Hybrid DVR or NVR type, you can also enter the Channel List interface by clicking
Set
beside IPC Management on the Camera Settings interface.
Adding IP Camera:
1.
Click the IPC List tag to enter the IPC management interface.
2.
Click
Add IPC
to enter the IPC Parameters interface.
