Handheld Thermal Monocular Camera User Manual
19
Chapter 8 Client Software Connection
Connect the device to the T-Vision App via hotspot, then you can capture picture, record video, or
configure parameters on your phone.
Steps
1. Hold
to show the menu of device.
2. Press
to enable hotspot function.
3. Turn on the WLAN of your phone and connect to the hotspot.
●
Hotspot Name: Wlan-IPTS Serial No.
●
Hotspot Password: the last 9 digits of serial No.
4. Scan the QR code to download and install the App.
Android System
iOS System
5. Open the App and connect your phone with the device. You can view the interface of device on
your phone.
Note
●
The device can not connect to the App if entering wrong password several times. Refer to
Restore Device to reset the device, and connect the App again.
●
The device should be activated for the first use. The default password must be changed after
the activation.