Handheld Thermal Monocular Camera User Manual
vii
consistent with that of the device.
Maintenance
●
If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
●
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
●
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the device may be impaired.
●
Clean the lens with soft and dry cloth or wiping paper to avoid scratching it.
Using Environment
●
Make sure the running environment meets the requirement of the device. The operating
temperature shall be -30°C to 55°C (-22°F to 131°F), and the operating humidity shall be 95% or
less.
●
DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp
environments.
●
This device can only be safely used in the region below 2000 meters above the sea level.
●
Avoid equipment installation on vibratory surface or places subject to shock (neglect may cause
equipment damage).
●
DO NOT aim the lens at the sun or any other bright light.
Emergency
●
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
Laser
When any laser equipment is in use, make sure that the device lens is not exposed to
the laser beam, or it may burn out. The laser radiation emitted from the device can
cause eye injuries, burning of skin or inflammable substances. Before enabling the
light supplement function, make sure no human or inflammable substances are in front of the
laser lens. Do not place the device where minors can fetch it.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various
countries or regions, including without limitation, the United States, European Union, United
Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your
professional legal or compliance expert or local government authorities for any necessary export
license requirements if you intend to transfer, export, re-export the thermal series products among
