Handheld Thermal Monocular Camera User Manual
20
Chapter 8 Client Software Connection
Connect the device to the HIKMICRO Sight App via hotspot, and then you can capture picture,
record video, or configure parameters on your phone.
Steps
1. Hold
to show the menu of device.
2. Press
to enable hotspot function.
3. Turn on the WLAN of your phone and connect to the hotspot.
●
Hotspot Name: HIK-IPTS Serial No.
●
Hotspot Password: the last 9 digits of serial No.
4. Search the HIKMICRO Sight on App Store (iOS System) or Google Play™ (Android System) to
download it, or scan the QR code to download and install the App.
Android System
iOS System
5. Open the App and connect your phone with the device. You can view the interface of device on
your phone.
Note
●
The hotspot function will be turned off automatically when power is less than 15%.
●
The device cannot connect to the App if you enter wrong password several times. Refer to
to reset the device, and connect the App again.
●
The device should be activated for the first use. The default password must be changed after
the activation.
Summary of Contents for -TS03-W-LH19
Page 1: ...Handheld Thermal Monocular Camera User Manual...
Page 36: ...UD27840B...