English
25
7. Asphalt cutting (Hammering)
●
Cutter
Overall length
Width
Code No.
280 mm
45 mm
981924
8. Digging
●
Scoop
Code No. 956126
9. Surface Roughing (Hammering)
●
Shank
Overall length
Code No.
250 mm
955186
●
Bushing Tool
Code No. 955183
+
APPLICATIONS
○
Drilling anchor holes
○
Drilling holes in concrete
○
Crushing concrete, chipping, digging, and squaring
(Some applications need optional accessories)
PRIOR TO OPERATION
1. Power
source
Ensure that the power source to be utilized conforms to the power requirements speci
fi
ed
on the product nameplate.
2. Power
switch
Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle
while the power switch is in the ON position, the power tool will start operating immediately,
which could cause a serious accident.
3. Extension
cord
When the work area is removed from the power source, use an extension cord of su
ffi
cient
thickness and rated capacity. The extension cord should be kept as short as practicable.
4. Check the receptacle
If the receptacle only loosely accepts the plug, the receptacle must be repaired.
Contact a licensed electrician to make appropriate repairs.
If such a faulty receptacle is used, it may cause overheating, resulting in a serious hazard.
000Book̲DH40SC̲ChS.indb 25
000Book̲DH40SC̲ChS.indb 25
2018/03/27 15:54:52
2018/03/27 15:54:52
