English
49
(4) Fit the removed base ass'y to the rack provided on the body's outer housing after adjusting
the pinion of the base ass'y thereto. Then tilt the lock lever towards the
fi
x side, and
fi
x the
base ass'y securely.
When removing the bits, do so by following the steps for installing bits in reverse order.
2. Install without using the lock pin
(1) Remove the base ass'y from the body.
(2) Deeply inset the bit into the collet cone hole. (The
distance is 15 mm or more from side of collet nut.)
(3) Use a 13 mm Wrench to secure the shaft, and securely
tighten the collet nut with the included wrench. (
Fig. 12
)
(4) Fit the removed base assembly to the rack provided on
the body's outer housing after adjusting the pinion of the
base assembly thereto. Then tilt the lock lever towards
the
fi
x side, and
fi
x the base ass'y securely.
When removing the bits, do so by following the steps for
installing bits in reverse order.
NOTE
○
Ensure that the collet nut is
fi
rmly
tightened after inserting a bit. The collet
cone may become deformed if the
collet cone is tightened without a bit set
in place.
○
Ensure that the lock pin is not inserted
into the shaft after tightening the collet
cone. Failure to do so will result in
damage to the lock pin and shaft.
○
Use only trimmer bits of which the
maximum speed, as indicated on the
bit, does exceed the maximum speed
of the trimmer.
3. Exchanging the collet cone
(1) Securing the shaft, remove the collet nut, and exchange the collet cone.
(2) Attach the nut, insert the bit, and tighten the nut. (
Fig. 13
)
PRIOR TO OPERATION
WARNING
To avoid a serious accident, press the power button located on the switch panel to
turn the power OFF, and pull out the battery.
1. Installation direction of base ass’y
The switch position can be changed according to preference by reversing the installation
direction of the base ass’y.
Fig. 12
Tighten
13 mm
Wrench
Loosen Bit Collet nut
23 mm
Wrench
Fig. 13
Collet cone
(6 mm, 8 mm)
(Optional accessories)
Collet nut
Collet cone
(6.35 mm)
00Book̲M1808DA̲ChS.indb 49
00Book̲M1808DA̲ChS.indb 49
2021/12/01 14:42:45
2021/12/01 14:42:45
